Electric Motors Manufacurer in Vadodara, Gujarat, India - ELCEN Machines Pvt. Ltd.
 
   
 
 
 
  Improved Efficiency Three Phase Motors (IE1)
  IE 2 Energy Efficient Motors
  Standard Motors (Foot Mounted)
  Standard Motors (Flange Mounted)
  Standard Motors (Face Mounted)
  Brake Motors
  Dual Speed Motors
  Dual Voltage Motors
  Inverted Rated Motors
  Cooling Tower Motors
  Torque Motors
  Crane Motors
  Custom Build Motors
 
 
  Download Brochure

Brake Motors

 
  Type of Load
  Low mass, uniform loading, non-intermittent operation
  Low mass, light shock load with intermittent operation
  Low mass, light shock load with intermittent operation
  Low mass, light shock load with intermittent operation
  Low mass, light shock load with intermittent operation
 
Safety Factor
2
2.5
3
3
3.5
  SELECTION
Depending upon the application, the service
factor of the brake has to be selected for
proper braking.
 
  Service factors for guidelines are mentioned in the selection table.
How ever while selecting the service factor, other criteria like mounting
positions, type of transmission and reductions should also
be considered as well.
 
SELECTION OF “ELCEN” DC FAILSAFE BRAKE MOTOR
 
DESCRIPTION
“ELCEN” Brake motors are normally supplied with fail safe brakes, also known as normally ON brake. The Motor is braked (Locked) when power is not applied i.e. de-energized to brake. This ensures real fail safe braking. The Construction is quite robust and requires very limited maintenance. With wearing of liners on the rotor of brake, the air – gap can be easily adjusted. If necessary. The rotor can be replaced completely as will, The brake is mounted on end cover on non-driving end of the motor. It comes with a Manual release lever. Depending upon the application requirement, AC or DC brake can be used.
 
SELECTION OF “ELCEN” AC FAILSAFE BRAKE MOTOR
 
Unless otherwise specified, in AC fail safe brake, 415V 3 phase AC voltage brakes are supplied. Where as in DC fail safe brake. Brake voltages are 190V D.C., with a rectifier of 415V A.C. dual phase input and 190V D.C. output, duly fitted in the terminal box of the motor. For quicker releasing action of DC brake, 96V D.C. brakes can be used with the same rectifier but without rectifier. For these supply voltages of brake, inbuilt rectifier is not
available, hence the brake, supply voltage of 230V or 110V AC, 3 phase can be supplied.
 
 
(DC) Brake Motor Wiring Details

SWITCHING (D.C. brakes)
Motors are connected with AC switching as standard. For faster action and reduction of the delay in operation, DC switching can be used. Care must be taken with DC switching as it generates heavy sparking, which can lead to shorting of switching contacts and ultimately leads to failure of contact braking. Suitable universal shock suppressors and capacitors can be used (not in the scope of “ELCEN”)

OPTIONS
Energized to brake (Normally off) brakes in different operating voltage can be supplied subject to confirmation. Rear side shaft extension for manual rotation of motor can be supplied if required.

LENGTH
As brake is mounted on the rear side of the motor, lengthof motor increases.

 
Electric Motors Manufacturer in Vadodara, Gujarat, INDIA
  © Elcen Machines Pvt. Ltd. 2015. All Rights Reserved